. This release of the Field Upgrade Software is applicable to Cisco WLCs that are installed with the controller software release 6.0 and later. You must install the FUS image only once. Console access to the WLC during the upgrade process is not required. However it is recommended that you have console access so that you can monitor the progress of the process. The FUS upgrade process reboots the Cisco WLC several times, and reboot the default runtime image.
May 1, 2018 - Bioconductor 3.7 has been designed expressly for this version of R. There are 98 new software packages in this release of Bioconductor. Of microarray data from one platform (Affymetrix Human Genome U133 Plus 2.0). Note that many RGMQL functions are not directly executed in R environment,. The Atlassian JIRA Software team is proud to announce the release of JIRA Software 7.1.0. This release contains major updates and fixes, focused on providing purpose-built experience for software teams. Upgrading from JIRA or JIRA+JIRA Agile to JIRA Software is free for all customers with active JIRA Software maintenance.
The whole process takes approximately 30 minutes. After you install the FUS image for a Cisco Flex 7500 Controller platform, the RAID firmware is also upgraded. During the installation process, the console messages displayed do indicate upgrade of the RAID firmware. However, it is not possible to verify the RAID firmware upgrade either by entering a command or viewing the bootlog. Downloading Field Upgrade Software Step 1 Go to the Cisco Software Center at this URL: Step 2 Choose Products Wireless Wireless LAN Controller. Step 3 Choose either of the following depending on the controller platform you use:.
Integrated Controllers and Controller Modules. Standalone Controllers Step 4 Choose the controller model number or name. The Download Software page is displayed. Step 5 Choose Wireless Controller Software. Step 6 Click a controller software release. The software releases are labeled as follows to help you determine which release to download:. Early Deployment (ED) —These software releases provide new features and new hardware platform support as well as bug fixes.
Maintenance Deployment (MD) —These software releases provide bug fixes and ongoing software maintenance. Deferred (DF) —These software releases have been deferred. We recommend that you migrate to an upgraded release. Click a software release number. Click the filename (for example: AIR-CT2500-K9-2-0-0-0-FUS.aes). The following AES files are available for various controller platforms: – AIR-CT2500-K9-2-0-0-0-FUS.aes – AIR-CT7500-K9-2-0-0-0-FUS.aes – AIR-CT8500-K9-2-0-0-0-FUS.aes Step 7 Click Download.
Step 8 Read Cisco End-User Software License Agreement and then click Agree. Step 9 Save the file to your hard drive. Step 10 Copy the AES file (for example AIR-CT2500-K9-2-0-0-0-FUS.aes) to the default directory on your TFTP or FTP server. Upgrading FUS Image Step 1 Upload your controller configuration files to a server to back them up. Step 2 Get the controller software image as defined in, and follow these steps: a.
Choose Wireless Wireless Controller. The following options are available: Integrated Controllers and Controller Modules and Standalone Controllers. Depending on your controller platform, click one of the above options. Click the controller model number or name. The Download Software page is displayed.
Click a controller software release. The software releases are labeled as follows to help you determine which release to download: – Early Deployment (ED) —These software releases provide new features, new hardware platform support, and bug fixes. – Maintenance Deployment (MD) —These software releases provide bug fixes and ongoing software maintenance. – Deferred (DF) —These software releases have been deferred.
We recommend that you migrate to an upgraded release. Choose a software release number. Click the filename (for example, AIR-CT2500-K9-2-0-0-0-FUS.aes). Click Download. Read Cisco’s End User Software License Agreement and then click Agree. Save the file to your hard drive.
Repeat steps a through k to download the remaining file. Step 3 Copy the controller software image (filename.aes) to the default directory on your TFTP or FTP server. Step 4 (Optional) Disable the 802.11 networks. Step 5 Disable any WLANs on the controller.
Step 6 Choose Commands Download File to open the Download File to Controller page. Step 7 From the File Type drop-down list, choose Code.
Step 8 From the Transfer Mode drop-down list, choose from the following options:. TFTP. FTP Step 9 In the IP Address text box, enter the IP address of the server. If you are using a TFTP server, the default values of 10 retries and 6 seconds for the Maximum Retries and Timeout text boxes should work correctly without any adjustment. However, you can change these values. Step 10 If you are using a TFTP server, the default values of 10 retries for the Maximum Retries text field, and 6 seconds for the Timeout text field should work correctly without any adjustment. However, you can change these values if desired.
To do so, enter the maximum number of times that the TFTP server attempts to download the software in the Maximum Retries text box and the amount of time (in seconds) that the TFTP server attempts to download the software in the Timeout text box. Step 11 In the File Path text box, enter the directory path of the software. Step 12 In the File Name text box, enter the name of the controller software file (for example, AIR-CT2500-K9-2-0-0-0-FUS.aes). Step 13 If you are using an FTP server, follow these steps:. In the Server Login Username text box, enter the username to log into the FTP server.
In the Server Login Password text box, enter the password to log into the FTP server. In the Server Port Number text box, enter the port number on the FTP server through which the download occurs. The default value is 21. Step 14 Click Download to download the software to the controller. A message appears indicating the status of the download. Step 15 After the download is complete, click Reboot.
Step 16 If prompted to save your changes, click Save and Reboot. Step 17 Click OK to confirm. Step 18 After the controller reboots, repeat step 6 to step 17 to install the remaining file. Step 19 Reenable the WLANs. Step 20 For Cisco WiSM2, reenable the controller port channel on the Catalyst switch.
Step 21 If you have disabled the 802.11 networks in Step 4, reenable them. Step 22 To verify the controller software version, choose Monitor on the controller GUI and see Software Version in the Controller Summary area. Upgrading FUS Image in a High Availability Environment The following procedure describes how to upgrade FUS image in both primary and secondary controllers in a High Availability environment without having a downtime. Step 1 Install the FUS image in the primary controller, which results in FUS image getting installed in the secondary controller as well. Step 2 After the FUS image installation is complete, instead of rebooting both the primary and secondary controllers at the same time, reboot only the primary controller such that the secondary controller becomes the active controller and the services remain unaffected. Step 3 After the primary controller is rebooted and the controller is back to being the active controller, reboot the secondary controller to complete the FUS image upgrade.
Caveats The following sections lists and for Cisco controllers and lightweight access points for version 2.0.0.0. For your convenience in locating caveats in Cisco’s Bug Toolkit, the caveat titles listed in this section are drawn directly from the Bug Toolkit database. These caveat titles are not intended to be read as complete sentences because the title field length is limited. In the caveat titles, some truncation of wording or punctuation might be necessary to provide the most complete and concise description.
Software Release Note Glm 2 0 Version 2 0 6 For Mac Free
The only modifications made to these titles are as follows:. Commands are in boldface type. Product names and acronyms might be standardized. Spelling errors and typos might be corrected. If you need information about a specific caveat that does not appear in these release notes, you can use the Cisco Bug Toolkit to find caveats of any severity. Click this URL to browse to the Bug Toolkit.
We are thrilled to announce the release of JIRA Software Server 7.1.0, our purpose-built application designed for software teams, now made even better! From our launch in October 2015, we've worked especially hard to introduce new features and improvements, as well as enhance your experience in JIRA Software. From the highly requested and the feature, to having the ability to, and, we are bringing JIRA Software to a whole new level.
We also know how valuable integration is to your teams, so we've ramped up our integration tools more than ever — now, you can add for your boards, use,. We're very much committed to enhancing the overall user experience in JIRA Software, so we improved the, as well as tidied up the interface to make and easier for you, and we fixed some to get more accurate results in your agile reports. Not only that, we also made that will further simplify JIRA Software administration. We're currently working on several powerful features to enable your teams to go beyond just shipping code, so keep an eye out for future releases! Jason Wong, Product Manager, JIRA Software.
Known bug We've identified a with JIRA platform 7.1 which affects this release. If you've installed or upgraded to this version, and you attempt to through the Add-ons page, JIRA will report an error. The add-on will be correctly installed, and you will need to perform a restart of JIRA to resume normal operation. The bug should not present itself again.
Information on how to stop and restart JIRA can be found on the appropriate operating systems installation guide. Sprint management permissions In addressing, JIRA Software now has a new — the. This new permission will be used instead of the 'Administer Project' permission for the following sprint-related actions. Reordering future sprints. Deleting future sprints. Editing sprint information (sprint name and dates). Moving the sprint footer Note that users will still need the and to add issues to and remove issues from sprints.
JIRA Administrators can to have the 'Manage Sprints' permission in the Permission Schemes page. Parallel Sprints out of Labs Parallel Sprints are no longer just a Labs feature in JIRA Software. If you have two teams working from the same backlog, you can now enable in the new JIRA Software configuration page. Reopening sprints You can now that have been closed too early, by mistake, or for any other reason. All you need to do is click Reopen Sprint in the Sprint Report of the sprint you want to reopen. Printing issue cards Whether you're planning some work or working on some issues on a Scrum or Kanban board, you can now.
You can use the printed cards on a physical board, which can be a replica of your board in JIRA Software. You can print just one issue card, multiple cards, or even all of them in small-, medium-, and large-size prints. Webhooks for Agile boards You can now register board-related events for a webhook in JIRA Software. This lets JIRA Software notify your add-ons or web applications whenever a board is created, updated, deleted, or has its configuration changed. Just choose the desired events when creating or updating your.
Project issue view The new 'project issue view' for JIRA Software gives you an expanded view of any issue, from within the issue navigator of a project. Just navigate to Issues in the project sidebar, open an issue, and click the icon or an issue link in an issue. And the target issue will be displayed like this.
This new view works exactly like the regular issue view (e.g. Keyboard shortcuts, pagination, inline editing, etc) but you'll get much more space without losing the project sidebar. Changes for JIRA administrators If you administer a JIRA Software instance, make sure you check out the. We've introduced a number of new features and improvements to JIRA administration, which all affect JIRA Software 7.1.0.
Feature improvements Of course, that's not everything we've done in this release. We also focused on enhancing existing JIRA Software features, to provide your software teams a more seamless experience. Sprint Report and Velocity Chart changes As stated above, we made some changes to the Sprint Report and Velocity Chart calculations. The changes fix inconsistencies in the way values are reported, depending on factors such as:. estimated cards brought into a sprint after it had started,. unestimated cards brought into a sprint late, and then estimated, and. issues that were re-estimated during a sprint.
These changes ensure all the work your team completes in a sprint is counted in these key performance reports. The now consistently reports these factors in the completed column for each sprint. The now shows initial values and updated values for each item, and the total completed will be accurate. The fix applies retrospectively to all reports. Diagnostics for application links We've baked a new diagnostics experience right in to the Application Links plugin, so it's available straight out of the box – you don't have to install or maintain a separate plugin. You now get instant visibility into the status of your integrations, and focused diagnostics when things stop working: Read more about. Smart Commits for Bitbucket Server JIRA Software now supports Smart Commits for Bitbucket Server. You can now process your JIRA Software issues from using Smart Commits. With Smart Commits, you embed specific commands into your Bitbucket Server commit messages that allow you to:. Comment on issues.
Record time tracking information against issues. Transition issues to any status defined in the JIRA Software project's workflow Read more about. And here are more enhancements that we added to existing JIRA Software features, which now give you the ability to:. Add comments when flagging issues. Select the destination of incomplete issues when completing sprints. View and create boards faster.
Issue flag comments - Flags in issues are an indication that these issues are important for some reason. JIRA Software takes one step further by letting you so you can add that particular reason why you're flagging or unflagging an issue. After adding your comment, it will appear in the Comments section of the issue, with an indication that a flag was added or removed accordingly. Destination selection for incomplete issues - As much as we want to complete all issues in a sprint, there may be times when we can't do this for some reason. When this happens, you can now where the incomplete issues will be moved — to a future sprint of your choice, or back to the Backlog if you prefer. Improvements in viewing and creating boards - We've simplified how you can view all of the boards in your instance. Previously, you would select Boards (in header) Manage Boards from the top navigation bar, and this shows the boards you've recently visited. However, if you've just started using JIRA Software and you haven't viewed any boards yet, you'd see an empty 'Recently visited boards' page.
Then, you'd have to click All boards just to view the boards in your instance. We've removed that extra step and modified the top navigation bar — now, you would simply select Boards (in header) View All Boards to view all of the boards in your instance. In relation to that, we've also introduced more convenient ways to create boards:. If you're using JIRA Software for the first time, or you're from Boards (in header) View All Boards, your board's name will be automatically based on your project key. But don't worry — you can still via the 'Board Configuration' screen. One for the developers out there — If you've been using the JIRA Agile REST API to work with boards in JIRA Software, you'll be happy to know that you can now create boards via the REST API.
Check out the new 'Create board' method in the, and you'll be whipping up new boards in no time at all. V7.1.1 - 2 March 2016 This is a minor feature improvement and bug fix release. This release has been canceled due to a bug that affects MySQL and Microsoft SQL Server databases. We are working on resolving this issue for our next release. For more information on the bug you can view - Getting issue details.
This bug only affects customers using Microsoft SQL Server and MySQL databases. If you are not using either of these databases, you will not be affected by this bug. Should you need further assistance please do reach out to us at. V7.1.6 - 5 May 2016 This release contains an update to our analytics. The update includes an option which allows Atlassian to present a Net Promoter Score (NPS) question and a short survey to users regarding their JIRA application experience.
When you first install this release, you'll be presented with a statement regarding the update to the analytics, and you'll be able to decide whether to enable or disable this feature. If you'd prefer to enable or disable the feature at a later date, you can do so by selecting System, and then selecting Analytics in the Advanced section of the sidebar. The feedback we gather will be used to help us improve the user experience for all our customers. This is a minor feature improvement and bug fix release.